products-门徒娱乐平台

 products-门徒娱乐平台
welcome to sino-galvo (jiangsu) technology co., ltd.official website!
sg1105 galvo scanner

sg1105 high speed galvo scanner motors are introduced from america.

it has good running stability, high positioning accuracy, fast marking speed, strong anti-interference ability, the overall performance of sg1105 has reached the international leading level in this field.


the advantages are as following:

■ adopted with high-performance scanning motor which imported from the america and the international advanced photoelectric sensing technology.

■ differential photoelectric sensor for accurate detection of motor rotor position, good linearity, lower drift, high resolution and repeat positioning.

■ drives with advanced detection ability of position and speed, greatly improved the dynamic response performance and scanning speed of the whole system.

■ design of overload, over-current and reverse connect protection, makes the system running more reliable.

■ the whole system adopted the optimization designing of electromagnetic compatibility, with high signal-to-noise ratio and strong anti-interference ability.

■ scanner size is smaller, with 7mm beam input aperture, which can meet the industrial demands of higher speed, higher precision and more compact systems.

■ with only 700g total weight, the scanner can be integrated into different application systems easily. the housing is very strong and dustproof. thus it can be used in the extremely bad environment.


sg1105 technical parameters

speed

marking speed(1)

6000mm/s

writing speed(2)

438cps

step response time(1% of   full scale)

320us

step response time(10% of   full scale)

660us

tracking error time

162us

precision and error

linearity

99.9%

repeatability (rms)

8μrad

gain error

5mrad

zero offset

5mrad

long-term drift over 8   hours

0.5mrad

scale drift

40ppm/℃

zero drift

15μrad/

wavelength(3)

10600nm/1064nm/355nm

power and signal

input voltage

±15vdc

rated current

2a

interface signal

digital

xy2-100

analog

±5v

max machinery scan angle(4)

±15°

working current, temperature, dimension

working temperature

0--45

storage temperature

-10--60

aperture

7mm

galvanometer scanner dimension   (lxwxh)

80x69x80mm

galvanometer scanner weight

≈0.7kg

    note: the above data are tested after 30 min warm-up

(1) with f-theta objective, f=160mm, marking 2mm height single character

(2) with f-theta objective, f=160mm, marking 1mm height single character per second

(3) special wavelength coating film can be customized

(4) if any special requirement, customization is available. factory default value is ±11°.